In the communication industry, the optical fiber distribution box is a very common optical fiber device, and more and more users use this product in the popularization of light. The optical fiber distribution box is mostly installed indoors, which has a good function of arranging the wiring. The use of the optical fiber distribution box not only improves the appearance of the line, but also makes the use and maintenance of the line more convenient. . Let's take a look at the installation method and requirements of the fiber optic distribution box! I hope to be helpful.
Installation method of optical fiber distribution box:
1. The optical cable is introduced into the box through the "waterproof connector" and peeled. The length of the strip is about 1.5 meters and fixed on the "optical cable fixing device". The reinforcing core in the optical cable is reserved for 100mm and fixed in the "optical cable fixing device" "Under" Grounding Plate ".
2. Introduce the stripped optical cable through the fiber maintenance sleeve and introduce it into the "fuse fusion disk". The remaining length is freely stored in the box and fixed with electrical tape.
3. Splice the fiber with the fiber maintenance sleeve to the single-head pigtail in the splice tray.
4. Pierce the single-head pigtail that is fused with the backbone optical cable that needs to be split into the 1:16 "optical splitter" box surface daughter board front input adapter, coil the redundant length on the bottom of the "flip board" and tie it fixed.
5. Insert one end of the "self-supporting butterfly-shaped introduction cable" through the "leather cable optical cable fixing device", install the "quick connector" and insert it on the front output adapter of the 1:16 "optical splitter" box surface board. And make a record on the identification paper. The redundant length is coiled on the front of the "flip board" and secured with a cable tie.
6. Manage all kinds of optical cables in the box through the wire loop to make the wiring smooth and beautiful.
