16 in 1 Agile CATV Analog Modulator
The AH1916AM is a 4RU rack mounted chassis that can install 16 pieces of high quality SAW filtered frequency agile modulators covering 860MHz. Low out-of-band noise makes this 16 in 1 agile CATV analog modulator ideal in adjacent channel headend.
Features
1.Full frequency agility allows the rapid creation of channel lineups
2.Each channel of this 16 in 1 agile CATV analog modulator is completely independent. Channel configuration is flexible
3.Two cooling fans for heat-sinking prolong service life
4.None-volatile memory ensures channel programming remains after power loss
5.Two-digit LED display provides quick channel identification
6.Available in NTSC or PAL configurations
Specifications of 16 In 1 Agile CATV Analog Modulator
RF | Frequency Range | 45 ~ 860 MHz |
Output Connector | F Connector | |
Output Level | 105 dBµV (Adj.) | |
Test Point | -20 dB | |
Isolation Port to Port | ≥ 35 dB | |
Return Loss | ≥ 12 dB | |
Gain | + 8 dB | |
GENERAL | Modulator Capacity | 16 |
Input Voltage Range | 110V or 220V | |
Cooling Fan | 2 | |
Consumption | 70W (Fully Loaded) | |
Dimension | 42 * 17 *20 cm | |
Net Weight | 9 KG (Fully Loaded) | |
Shipping Weight | 3.7 KG (Chassis Only) | |
10 KG ( Fully Loaded) | ||
Carton Size | 53 * 30 * 24 cm | |
Modulator Card | ||
RF | Output Frequency | 45 ~ 860 MHz any channel |
Output Level | 103 dBµV (Adj.) | |
Output Connector | F Connector | |
A / V Ratio | -11 ~ -18 dB (Adj.) | |
Frequency Stability | ±10KHz | |
Video Input Level | 0.6-1.5Vp-p (87.5% Modulation) | |
Video Input Connector | Yellow RCA | |
Audio Input Level | 1Vp-p (25KHz Dev.) | |
Audio Input Connector | White RCA | |
GENERAL | Voltage | DC 5V |
PRECAUTIONS
PRECAUTIONS | REQUIREMENTS |
Avoid heat buildup | Allow rack space (1'')between powered headend product in the equipment |
Ensure easy access to rack wiring | Allow a minimum of 18inches behind the equipment rack |
Facilitate servicing and maintenance | Allow a minimum of 36'' of clearance in front of the equipment rack |
Avoid direct heating or air conditioning | If unavoidable, use deflector plates |
AC power source outlets | Locate equipment near sufficient outlets to provide power for test equipment and power tools |
Rack support | Make certain rack supports are sufficiently rigid to support racks |
Building leakage | Beware of dripping water onto equipment from leaky roofs, waveguide roof entries, and cold water pipe condensations |
Hot Tags: 16 in 1 agile CATV analog modulator, China, manufacturers, suppliers, factory, wholesale, Fixed Channel Modulator, Analog Modulator, CATV Modulator 16 Channel, Single Channel Agile Modulator, IP To Analog Modulator, Av To Rf Modulator
You Might Also Like
Send Inquiry