Indoor RF Splitter

2~8 ways available
Two way transmission design
Against spikes and ferrite saturation
Round contact insertion pins

Send Inquiry

Product Introduction

Indoor RF Splitter is a splitter/divider which divides signal from a feed cable into two and more output signals.

Indoor RF Splitter

Features

2~8 ways available

Two way transmission design

Against spikes and ferrite saturation

Round contact insertion pins

Zinc alloy die casting shall with nickel plated surface treatment

Surface spray-paint treatment, anti-oxidation and no color fading

Application

Satellite CATV, HFC

Technical Parameter of Indoor RF Splitter

Item	2 way splitter	3 way splitter	3 way splitter	4 way splitter	6 way splitter	8 way splitter
Insertion Loss	-dB (Max)
5 MHz - 47 MHz	3.5	3.5/6.9	5.8	6.9	9.3	10.3
48MHz - 450MHz	3.9	3.9/7.3	6.2	7.3	9.6	11.0
451 MHz - 750 MHz	3.9	3.9/7.5	6.5	7.5	9.9	11.5
751 MHz - 1000 MHz	4.1	4.0/8.0	7.0	8.0	11.0	12.5
Isolation Loss	-dB (Min.)
5 MHz - 47 MHz	22	25	25	25	25	25
48MHz - 450MHz	26	24	25	24	24	24
451 MHz - 750 MHz	22	23	24	23	22	22
751 MHz - 1000 MHz	22	21	22	21	21	21
Return Loss (IN/OUT)	-dB (Min.)
5 MHz - 47 MHz	20	18	18	18	18	18
48MHz - 450MHz	22	21	21	20	22	22
451 MHz - 750 MHz	20	21	21	20	20	20
751 MHz - 1000 MHz	20	18	18	18	18	18
General Information
Impedance	75 Ohms
RFI Shielding	- 120 dB
Intermodulation	better than -45dBmV
Test Enviroment:Room Temperature: +20℃
Other Requirement:
1. Plastic insert to be in white colour.
2. Cap of F port to be in clear white colour
3. Grounding screw to be 4 x 12 mm in green, 1/4 hex, open flat slot, philips.
4. Fixing screw to be 4 x 18 mm in sheet metal, 1/4 hex, open flat slot, Philips.
5. Housing to be bright tin plated
6.Threads of F-PORT use 3/8"-32 UNEF-2B.
7.500mA current passes from In to one of Out ports.

003

Hot Tags: indoor RF splitter, China, manufacturers, suppliers, factory, wholesale, Indoor RF Splitter, Outdoor CATV Splitters

No Information