16 in 1 IP To ISDB-T Modulator
16 in 1 IP to ISDB-T Modulator
SFT3306I 8in1/16in1 ISDB-T modulator is the latest generational Mux-modulating device developed by Softel. It has 8 (or16) multiplexing channels and ISDB-T modulating channels, and supports maximum 512 IP input through the 3 GE ports and 8 (or16) ISDB-T non-adjacent carriers (50MHz~960MHz) output through the RF output interface. The device is also characterized with high integrated level, high performance and low cost. This is very adaptable to newly generation DTV broadcasting system.
FEATURES of 16 in 1 IP to ISDB-T Modulator
* 3 GE ports ( max 512 IP in ) :
Data1 & Data2 bi-directional ports, max 512 IP in, 8/16 IP out.
* Maximum 840Mbps for each GE input
* Supports accurate PCR adjusting
* Supports CA filtering, PID remapping and PSI/SI editing
* Supports up to 256 PIDS remapping per channel
* Support 8 IP output through Data1 & Data2 over UDP/RTP/RTSP--Version I
* Support 16 IP output through Data1 & Data2 over UDP/RTP/RTSP--Version II
* 8 (or 16) non-adjacent carriers output which compliant to ISDB-Tb (ARIB STD-B31)
* Support Web-based Network management
Specification of 16 in 1 IP to ISDB-T Modulator
Input | Input | Max 512 IP input through 3 (front-panel Data port, Data 1 and Data 2) 100/1000M Ethernet Port (SFP interface optional). - For Version I Max 512 IP input through 3 (front-panel Data port, Data 1 and Data 2) 100/1000M Ethernet Port (SFP interface optional). – For Version II |
Transport Protocol | TS over UDP/RTP, unicast and multicast, IGMP V2/V3 | |
Transmission Rate | Max 840Mbps for each GE input | |
Mux | Input Channel | 512 IP streams |
Output Channel | 8 (or 16) | |
Max PIDs | 256 per channel | |
Functions | PID remapping (auto/manually optional) | |
PCR accurate adjusting | ||
PSI/SI table automatically generating | ||
Modulation Parameters | Standard | ARIB STD-B31 |
Bandwidth | 6M | |
Constellation | QPSK, 16QAM, 64QAM | |
Guard Interval | 1/32, 1/16, 1/8, 1/4 | |
Transmission Mode | 2K, 4K, 8K | |
Code rate | 1/2, 2/3, 3/4, 5/6, 7/8 | |
MER | ≥40dB | |
RF frequency | 50~960MHz, 1KHz step | |
RF output level | -20dBm~+10dBm(87~117dbµV), 0.1dB stepping | |
Output Channel | 8 non-adjacent carriers output - Version I 16 non-adjacent carriers output - Version II | |
RF Output | Interface | 1 F typed port, 75Ω impedance |
ACLR | -50 dBc | |
TS output | 8 (or 16) IP output over UDP/RTP/RTSP, unicast/multicast, 2 (Data1& Data2) 100/1000M Ethernet Ports | |
System | Network management software (NMS) supporting | |
General | Demission | 480mm×327mm×44.5mm (WxLxH) |
Weight | 5.5kg | |
Temperature | 0~45℃(operation), -20~80℃(storage) | |
Power Supply | AC 100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz | |
Consumption | 15.4W | |
Order Guide of 16 in 1 IP to ISDB-T Modulator
Version I | Version II | |
512 IP input to 8ch ISDB-T carriers out, 8 IP out | x | |
512 IP input to 16ch ISDB-T carriers out, 16 IP out | x |
Acquisition Check of 16 in 1 IP to ISDB-T Modulator
When user opens the package of the device, it is necessary to check items according to packing list. Normally it should include the following items:
* SFT3306I 6 in 1 ISDB-T Modulator
* User’s Manual
* Power Cord
If any item is missing or mismatching with the list above, please contact local dealer.
Installation Preparation of 16 in 1 IP to ISDB-T Modulator
When users install device, please follow the below steps. The details of installation will be described at the rest part of this chapter. Users can also refer rear panel chart during the installation.
The main steps of the installation include:
* Checking the possible device missing or damage during the transportation
* Preparing relevant environment for installation
* Installing NDS3306I 6 in 1 ISDB-T Modulator
* Connecting signal cables
* Connecting communication port (if it is necessary)
Grounding Requiremtn of 16 in 1 IP to ISDB-T Modulator
* All function modules’ good grounding is the basis of reliability and stability of devices. Also, they are the most important guarantee of lightning arresting and interference rejection. Therefore, the system must follow this rule.
* Coaxial cables’ outer conductor and isolation layer should keep proper electric conducting with the metal housing of device.
* Grounding conductor must adopt copper conductor in order to reduce high frequency impedance, and the grounding wire must be as thick and short as possible.
* Users should make sure the 2 ends of grounding wire well electric conducted and be antirust.
* It is prohibited to use any other device as part of grounding electric circuit
* The area of the conduction between grounding wire and device’s frame should be no less than 25mm2.
Enviorment Requirement of 16 in 1 IP to ISDB-T Modulator
Item | Requirement |
Machine Hall Space | When user installs machine frame array in one machine hall, the distance between 2 rows of machine frames should be 1.2~1.5m and the distance against wall should be no less than 0.8m. |
Machine Hall Floor | Electric Isolation, Dust Free Volume resistivity of ground anti-static material: 1X107~1X1010W, Grounding current limiting resistance: 1M (Floor bearing should be greater than 450Kg/㎡) |
Environment Temperature | 5~40℃(sustainable ), 0~45℃(short time) installing air-conditioning is recommended |
Relative Humidity | 20%~80% sustainable 10%~90% short time |
Pressure | 86~105KPa |
Door & Window | Installing rubber strip for sealing door-gaps and dual level glasses for window |
Wall | It can be covered with wallpaper, or brightness less paint. |
Fire Protection | Fire alarm system and extinguisher |
Power | Requiring device power, air-conditioning power and lighting power are independent to each other. Device power requires AC power 220V ±10% 50/60Hz or 110V ±10% 50/60Hz. Please carefully check before running. |
Company introduction and certificate
We have more than 100 staff, 10% of them are senior technicians. With more than 1,000 square meters standards production assembling lines, we have strict QC procedures. Each unit of our product will go through 3 layer QC procedures, material checking before production, stabililty and performance testing after production, packing detection before delivery.
Most of our products are exported to South America, Russia, and North European countries. Currently, Softel has its branch office in Mexico and will launch another office in Colombia, continuing supplying for numerous agents, integrated dealers, and equipment producers all over the world.
Through keen international business competition in good faith, all of our staff members feel a big accomplishment & work under heavy responsibility. In addition, we are much proud of providing our invaluable customers with our high quality, high reliability, high efficiency, and competitive products.
Shipping
1, Fedex/DHL/UPS/TNT for samples, door to door.
2, By air or by sea for bulk goods, for FCL; Air port/port receiving
3, Customers specifying freight forwarders or negotiable shipping method
4, Delivery time: 1-3 days for samples; 10-30 day for bulk goods
FAQ
1. How can I place an order?
(1) Negotiation is agreed upon for the product price and specifications.
(2) The Proforma invoice will be sent for confirmation.
(3) After the agreement on the proforma invoice, the customer makes the deposit.
(4) Manufacturing will be started as soon as the payment is confirmed by our bank.
(5) Ship out the goods within the agreed delivery deadline.
2. Can you do OEM for us?
Yes. If there is a certain order quantity, we can do OEM including printing, logo, and customized model for you.
3. How about the Warranty?
There are 12 months for the warranty.
While the warranty is not responsible for those broken by violence or updated with other brands.
Hot Tags: 16 in 1 ip to isdb-t modulator, China, manufacturers, suppliers, factory, wholesale, IP To Dvb t Modulator, Digital Headend Cable TV Qam Modulator, Turner ASI IP Input Qam Modulator, IP To ISDB T Modulator, DVB T Modulator, 32 Channels IP Qam Modulator
Previous
Catv Modulator 24 ChannelsYou Might Also Like
Send Inquiry