XGS-PON 10G Optical Receiver Active Node

XGS-PON 10G Optical Receiver Active Node

1.0 Brief introduction of XGS-PON 10G Optical Receiver Active Node

SRXG-2020AW, the working bandwidth is 47~1000MHz. This is a high performance low power, cost-effective optical active receiver with AGC WDM, suitble used for CATV FTTH Triple-Play network. Whether used in analog TV or digital TV. It has high sensitivity optical receiver tube and special low noise matching circuit. Receiving Sat high optical power can be adjusted by PAD level, played limiting output, so SRXG-2020AW within a large dynamic range of the received optical power of +2 ~-21dBm, have good and excellent characteristics. Triple play, fiber to the home, using the SRXG-2020AW optical receiver which can save lots of optical fiber amplifier power resources. For operators, it can greatly decrease the cost of the network building.

2.0 Product feature of XGS-PON 10G Optical Receiver Active Node

1. Extra-low noise(3.8% modulate, -10dBm receive, CNR ≥ 45.3dB) 

2. Wide dynamic receiving optical power range: within Pin=-16, MER≥36.1dB 

3. Applicable EPON, GPON, XG-PON FTTH network 

. Can save a large number of optical power resource, greatly reduce the network configuration cost 

5. Within 47~1000MHz bandwidth, all with excellent flatness feature ( FL≤±0.75dB ) 

6. Metal case, offer safeguard for optoelectronic sensitive devices 

7. High output level, can be used by many users 8. Low power consume, high performance, high cost performance

3.0 Main Application of XGS-PON 10G Optical Receiver Active Node

1. CATV FTTH 

2. Integration of three network 

3. FTTH EPON, GPON, XG-PON

4.0 Status Indication of XGS-PON 10G Optical Receiver Active Node

1. Red: No optical input or optical power < -16dBm 

2. Green: Optical power range ＞-16dBm

5.0 Technical index of XGS-PON 10G Optical Receiver Active Node

6.0 CNR, MER DEGRADATION TABLE of XGS-PON 10G Optical Receiver Active Node

7.0 Note of XGS-PON 10G Optical Receiver Active Node

1. The power adapter for this equipment: Input 110/220V, output DC 12V(0.6A).

2. Keep the optical connector clean, the bad link will cause too low RF output level.

 3. Should not adjust by themselves, to avoid the device damage.

Other products: 

olt, onu, optical transmitter& receiver, edfa, connector, terminal box, FOSC, patch cord, fiber cable, modulator, encoder, coaxial cable, taps, satellite optical transmitter&receiver, android tv box and etc.

Shipping & packaging

Hot Tags: xgs-pon 10g optical receiver active node, China, manufacturers, suppliers, factory, wholesale, 220V Ftth Catv Optical Receiver, CATV Mini Optical Fiber Node, FTTH CATV Optical Receiver With 1550nm Filter, Micro Optical Receiver, Dbc Optical Receiver Node, Passive Optical Receiver With WDM