CATV 1310nm Optcial Fiber Transmitter with Dual Power Supply
Our company will continue to uphold the service tenet of 'Quality First, Serve Customers to the End', carry forward the entrepreneurial spirit of pioneering, striving for excellence, and provide users and society with better 4GE CATV WIFI EPON ONU, EPON ONU, ODF and better services! With a variety of standard products, we are confident to meet the needs of customers while maintaining cost competitiveness. Our company has established long-term cooperative relations with many manufacturers and can provide a steady stream of goods for new and old customers! We provide high quality products, competitive prices and the first class service. We firmly establish a broad view of risk, always give priority to supporting development, and insist on preventing and controlling risks in the course of development.
ST1300 adopts high linearity ORTOL DFB laser, build-in perfect pre-distortion adjustment circuit and laser APC,ATC closed loop control circuit. All the operating parameters are controlled by micro-processor, The LCD screen on the front panel can display relative operating status and the fault information.
Features
This CATV 1310nm Optical Fiber transmitter adopt the imported DFB laser named Agere (ORTEL、Lucent),Mitsubishi、Fujisu、AOI and so on.
The internal RF driving amplifier and controlling circuit of this machine can ensure the best C/N. The perfect and stable circuit of optic power output and controlling circuit of thermoelectric refrigeration device of laser module assure the user the best quality and stable working for a long time.
The internal micro-processor software has many functions such as laser monitoring, number display, trouble alarm and on-line management. Once the working parameter of the laser is out of the fixed range, there will be a red light glistening to alarm.
The RS-232 standard connector makes it is possible to manage on line and monitor in another place.
The machine adopts 19”standard shelf and it can work with the voltage from 110V to 254V.
Technical Parameters
Model（ST1310） | -2 | -4 | -6 | -8 | -10 | -12 | -14 | -16 | -18 | -20 |
Optic Power （mW） | ≥02 | ≥04 | ≥06 | ≥08 | ≥10 | ≥12 | ≥14 | ≥16 | ≥18 | ≥20 |
Optic Power （dBm） | 3.0 | 6.0 | 7.8 | 9.0 | 10.0 | 10.8 | 11.5 | 12.0 | 12.3 | 12.8 |
Optic Wavelength （nm） | 1290～1310 | |||||||||
Fiber Connector | FC/APC、SC/APC、SC/UPC (Selected by the Customer) | |||||||||
Working Bandwidth (MHz) | 47～862 | |||||||||
Channels | 59 | |||||||||
CNR （dB） | ≥51 | |||||||||
CTB （dBc） | ≥65 | |||||||||
CSO （dBc） | ≥60 | |||||||||
RF Input Level (dBμV) | Not with pre-distortion | 78±5 | ||||||||
With pre-distortion | 83±5 | |||||||||
Band Unflatness | ≤0.75 | |||||||||
Power Consumption (W) | ≤30 | |||||||||
Power Voltage (V) | 220V(110～254) | |||||||||
Working Tem (℃) | 0～45 | |||||||||
Size (mm) | 483×370×44 | |||||||||
Warranty Term
CATV 1310nm Optical Fiber transmitters are covered by ONE YEAR Limited Warranty, which starts from the initial date of your purchase. We provide its customer whole-life technical supports. If warranty is expired, repair service only charges parts (if required). In the event that a unit must be returned for service, before returning the unit, please be advised that:
1.Warranty mark pasted on the housing of unit must be in good conditions.
2.A clear and readable material describes model number, serial number and troubles should be offered.
3.Please pack the unit in its original container. If the original container is no longer available, please pack the unit in at least 3 inches of shock absorbing material.
4.Returned unit(s) must be prepaid and insured. COD and freight collect can not be acceptable.
NOTE: we do not assume responsibility for damage caused by improper packing of returned unit(s).
The following situation is not covered by warranty:
1.The unit fails to perform because of operators’ faults.
2.Warranty mark is modified, damaged and/or removed.
3.Damage caused by Force Majeure.
4.The unit has been unauthorized alteration and/or repaired.
5.Other troubles caused by operators’ faults.
Conversion of Optical Power
mW | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
dBm | 0.0 | 3.0 | 4.8 | 6.0 | 7.0 | 7.8 | 8.5 | 9.0 | 9.5 | 10.0 | 10.4 | 10.8 | 11.1 | 11.5 | 11.8 | 12.0 |
mW | 17 | 18 | 19 | 20 | 21 | 22 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 |
dBm | 12.3 | 12.5 | 12.8 | 13.0 | 13.2 | 13.4 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 |
Our firm since its inception, normally regards item top quality as company life, constantly make improvements to generation technology, improve product excellent and repeatedly strengthen organization total good quality management, in strict accordance with the national standard ISO 9001:2000 for CATV 1310nm Optcial Fiber Transmitter with Dual Power Supply. In the new situation, we have boosted our confidence in development, improved our management level and continuously optimized our industrial layout. We uses the e-commerce system to strengthen and promote customer relationship management, customer business operation, customer service and information communication.
You Might Also Like
Send Inquiry