CATV+Sat 1310 Optic Fiber Transmitter with AGC/Mgc

We are one of the major supplier of EOC, EDFA 32 Pon WDM, WDM EDFA Amplifier 1550nm in China. We have been adhering to the business philosophy of 'survive by quality and development by integrity', carry forward the spirit of 'dedication, integrity, and innovation', strengthen the management of product quality, and make product quality more stable. We actively create a good atmosphere of respecting knowledge, labor, creation and talents, and build a talent mechanism suitable for the development of the company.

1330nm optical transmitter with AGC MGC

The internal micro-processor software has many functions such as laser monitoring, number display, trouble alarm and on-line management. Once the working parameter of the laser is out of the fixed range, there will be a red light glistening to alarm.

The RS-232 standard connector makes it is possible to manage on line and monitor in another place

Display Board Operation Guide：

Press the button “Status” in the board, the working parameter of this machine can be seen in turn as follows,

1.Model: ：ST1310-02,04,06,08,10,12,14,16,18,20,22,24,26,28,30

2.Output Power: display the output power of this machine（mW）.

3.Laser Temp: the laser works between 20℃ and 30℃.If the temperature is out of this range, the red light will glisten to warm.

4.Bias Current: The bias current of the laser is the main working parameter of the laser. Only when the parameter is above 30mA, RF driving circuit can begin to work. The red light will shine to warn when the RF driving level comes out of the fixed value.

5.REFRG Current：showing the working current of heating or cooling which can make sure the standard temperature is 25℃.

6.+ 5V test（Reads）：showing internal actual Voltage of ±5V.

7.- 5V test（Reads）：showing internal actual-5V.

8.+24V test（Reads）：showing internal actual voltage of+24V.

 

Operating Guide：

1. Please examine this 1330nm optical transmitter with AGC MGC, shelf and the power to see if the power supply is good.

2. This machine adopts the switch power with high quality and high stability which makes it is suitable to work in voltage from 110V to 254 V.

3. Please make sure the connector is clean before installation. Please clean the fiber connector with pure alcohol before connecting the fiber.

4. After connecting the power, please turn on the power in the back of the board. The screen will show the basic information of this machine. After several seconds, the laser power will turn on automatically. If the machine is all right, the condition guide light (Laser) will turn from red to green. And the screen will show you the working condition of this machine at present.

5. Press the button “STATUS”, then you can see the parameters of this machine in turn.

6. If all the above working condition is all right, then examine whether the RF input level can satisfy the request in the test report. If it is all right, please connect the RF input to the transmitter.

We are confident that our CATV+Sat 1310 Optic Fiber Transmitter with AGC/Mgc can effectively strengthen our customers' competitive advantage and enhance their profitability at the same time. We have steadily grown into a global brand with international influence. To this day, our products remain classic and continue to innovate in technology, because we believe that innovative products have always been the driving force for our company's upward development.