DVB T Encoder Modulator MPEG4
With constant innovation and change, we have improved the technical content of our Fiber Optic Fusion Splicer Kit, Flat Cable Wire, Network Cable Cat 6 and achieved great success, making our company capable of becoming the industry leader. Respect for science, keep forging ahead, perfect and improve the quality of products is the goal of all staff of the company. With the participation of all staff, the company strictly implements the quality system and carries out all-round quality management. In order to ensure the quality of products, we adopt international safety standards and technologies to continuously improve and perfect the product performance.
IP to dvb-t modulator
IP to DVB-T modulator is an all-in-one device developed by us. It has 8 multiplexing channels and 8 DVB-T modulating channels, and supports maximum 1024 IP input through the GE port and 8 non-adjacent carriers (50MHz~960MHz) output through the RF output interface. The device is also characterized with high integrated level, high performance and low cost. This is very adaptable to newly generation DTV broadcasting system.
FEATURES of IP to DVB-T modulator
2 GE input, SFP interface
Supports up to 1024 channels TS over UDP/RTP, unicast and multicast, IGMP v2\v3
Max 840Mbps for each GE input
Supports accurate PCR adjusting
Supports PID remapping and PSI/SI editing
Supports up to 180 PIDS remapping per channel
Support 8 multiplexed TS over UDP/RTP/RTSP output
8 DVB-T non-adjacent carriers output, compliant to ETSI EN300 744 standard
Supports RS (204,188) encoding
Support Web-based Network management
Specification of IP to DVB-T modulator
Input | Input | 512×2 IP input, 2 100/1000M Ethernet Port (SFP) |
Transport Protocol | TS over UDP/RTP, unicast and multicast, IGMP V2/V3 | |
Transmission Rate | Max 840Mbps for each input channel | |
Mux | Input Channel | 1024 |
Output Channel | 8 | |
Max PIDs | 180 per channel | |
Functions | PID remapping(auto/manually optional) | |
| PCR accurate adjusting | ||
| PSI/SI table automatically generating | ||
Modulation Parameters | Channel | 8 |
Modulation Standard | ETSI EN300 744 | |
Constellation | QPSK/16QAM/64QAM | |
Bandwidth | 6/7/8 MHz | |
Trans mode | 2K/4K/8K | |
FEC | 1/2, 2/3, 3/4, 5/6, 7/8 | |
RF Output | Interface | F typed output port for 8 non-adjacent carriers |
RF Range | 50~960MHz, 1kHz stepping | |
Output Level | -20~+10dbm (for all carriers), 0.5db stepping | |
MER | ≥ 40dB | |
ACL | -55 dBc | |
TS output | 8 IP output over UDP/RTP/RTSP, unicast/multicast, 2 100/1000M Ethernet Ports | |
System | Web-based Network management |
Environment requirement
Item | Requirement |
Machine Hall Space | When user installs machine frame array in one machine hall, the distance between 2 rows of machine frames should be 1.2~1.5m and the distance against wall should be no less than 0.8m. |
Machine Hall Floor | Electric Isolation, Dust Free Volume resistivity of ground anti-static material: 1X107~1X1010W, Grounding current limiting resistance: 1M (Floor bearing should be greater than 450Kg/㎡) |
Environment Temperature | 5~40℃(sustainable ), 0~45℃(short time) installing air-conditioning is recommended |
Relative Humidity | 20%~80% sustainable 10%~90% short time |
Pressure | 86~105KPa |
Door & Window | Installing rubber strip for sealing door-gaps and dual level glasses for window |
Wall | It can be covered with wallpaper, or brightness less paint. |
Fire Protection | Fire alarm system and extinguisher |
Power | Requiring device power, air-conditioning power and lighting power are independent to each other. Device power requires AC power 220V ±10% 50/60Hz or 110V ±10% 50/60Hz. Please carefully check before running. |
Grounding Requirement
All function modules’ good grounding is the basis of reliability and stability of devices. Also, they are the most important guarantee of lightning arresting and interference rejection. Therefore, the system must follow this rule.
Coaxial cables’ outer conductor and isolation layer should keep proper electric conducting with the metal housing of device.
Grounding conductor must adopt copper conductor in order to reduce high frequency impedance, and the grounding wire must be as thick and short as possible.
Users should make sure the 2 ends of grounding wire well electric conducted and be antirust.
It is prohibited to use any other device as part of grounding electric circuit
The area of the conduction between grounding wire and device’s frame should be no less than 25mm2.
Company information
Shipping
1, Fedex/DHL/UPS/TNT for samples, door to door.
2, By air or by sea for bulk goods, for FCL; Air port/port receiving
3, Customers specifying freight forwarders or negotiable shipping method
4, Delivery time: 1-3 days for samples; 10-30 day for bulk goods
FAQ
1. What are the payment terms that you support?
Usually, we accept T/T, PayPal, Western Union, and Alibaba Trade Assurance. You can select the terms of payment which is more convenient for you.
2. What about the lead time?
Usually, if there's stock, we ship the goods within 3~5 working days after the deposit is confirmed. If it is out of stock, the lead time depends.
3. How about the shipping?
When the package is small, we normally choose FedEx, DHL, TNT, and UPS and so on, while the goods have high weight and volume, we suggest using air or sea shipment.
We have developed high-quality, efficient DVB T Encoder Modulator MPEG4 technologies that have improved quality and productivity and placed us far ahead of the competition in the industry. We adhere to the business philosophy of integrity first, operating in accordance with the law, and benefit sharing. We regard quality as life and customers as God. We are willing to work together with friends from all walks of life to create a better tomorrow! We believe we can provide you with caring service and high-quality products . We always regard product quality as the life of an enterprise, strengthen management, strive for perfection, and stimulate the creativity of our employees.
You Might Also Like
Send Inquiry