Factory 1550nm 1000MHz Fiber Optic Equipment Mini Optic Wdm AGC FTTH Node CATV Optical Receiver with 2RF Output
Build-in WDM
Input Wavelength: 1310/1550nm; CATV Operating: 1540~1563nm.
We are based on our own R&D system from the beginning to the end, and at the same time, we strive to learn from the advanced technology at home and abroad to develop high-quality 1330nm Optical Receiver With AGC MGC, FTTH 1 GE3 FE ONT With 2 Voice Ports, Centralization Barostat Power Supply. Adhering to the principle of 'Enterprising and Truth-Seeking, Preciseness and Unity', with technology as the core, our company continues to innovate, dedicated to providing you with the highest cost-effective products and meticulous after-sales service. Under no circumstances disappearing major functions in a quick time, it's a really should in your case of excellent good quality. We are highly aware of quality, and have the certification ISO/TS16949:2009.
CATV Receiver with WDM
SR100 series CATV converter for digital television, fiber to the home. When the input optical power output level Pin=-1dBm, Vo=6 8dB V, can be economically and flexibly apply the integration of three networks, fiber to the home network application.
SR100F-WD, CATV Receiver with WDM, adopts the high sensitivity optical receiving tube, without power supply, no power consumption.
Specifications
| CATV Receiver with WDM | Optic feature | Index | Supplement |
Optical parameter | CATV work wavelength | 1540~1563 nm | |
Pass wavelength | 1310~1490 nm | ||
Channel Isolation | ≥40 dB | ||
Response | ≥0.85 A/W | 1310nm | |
≥0.9 A/W | 1550nm | ||
Receiving Power | +2~-14 dBm | ||
Optical return loss | ≥55 dB | ||
Optical fiber connector | SC/APC | ||
RF parameter | Work bandwidth | 45~1050 MHz | |
Output level | >68 dBμV | Digital TV (pin=-1dBm) | |
Return loss | ≥14 dB | 47~862MHz | |
Output impedance | 75 Ω | ||
Output port number | 1 | ||
RF tie-in | F-female | ||
General feature | Work temp | -20~+55 ºC | |
Storage temp | -40~+85 ºC | ||
Work relative temp | 5~95 ºC |
Note
1. SR100, SR100-WF, SR100F, SR100F-WF and set top box (STB) of the RF input port directly connected. SR100-WD for user wiring box.
2. When using the RF connector, and the RF input interface must be tightened to STB. Otherwise the ground is bad and will cause high frequency segments Digital TV signals MER degradation.
3. Keep the optical connector clean, the bad link will cause too low RF output level.
We are dedicated to manufacturing Factory 1550nm 1000MHz Fiber Optic Equipment Mini Optic Wdm AGC FTTH Node CATV Optical Receiver with 2RF Output with the principle of 'the Best quality, the lowest price and the promptest delivery'. We warmly welcome our customers from home and abroad to visit us ! Please feel free to contact us! Our company takes 'sustainable development' as its strategic direction, and strives to achieve industry-leading product quality and help customers succeed. We would speed up the pace of going global, carry out global industrial layout, and constantly improve the international discourse power and influence.
You Might Also Like
Send Inquiry