Fiber Opitc Wdm FTTH Optical Node for Pon CATV FTTH Optical Receiver Node

Fiber Opitc Wdm FTTH Optical Node for Pon CATV FTTH Optical Receiver Node

SR2020AW, the operating bandwidth of 47~1000MHz, is a low power, high performance, cost-effective triple play, FTTH CATV optical receiver
Send Inquiry
Product Introduction

Our mission is to produce and supply goods in superb quality to satisfy customers' needs in 1GE ONU GPON CATV, RF Splitters, 16 In 1 Agile CATV Analog Modulator area. We are committed to be the best and the most unique supplier and we hope to have opportunities to satisfy our customers around the world. We solemnly promise to all sectors of society that we would like to verify and show our super comprehensive strength through your comprehensive investigation and comparison. Corporate culture is the soul and core competitiveness of an enterprise, and is the foundation of its longevity. The mission of our company is to innovate without forgetting environmental protection, to benefit the enterprise without forgetting to benefit customers. Win-win is our way to promote inclusive development, and we always uphold the principle of win-win cooperation whether we do business domestically or internationally.

Fiber node CATV Optical Receiver


Ftth Fiber Optical Node 1


1.0 PRODUCT DESCRIPTION of Fiber node CATV Optical Receiver

SR2020AW, the operating bandwidth of 47~1000MHz, is a low power, high performance, cost-effective triple play, Fiber node CATV optical receiver, Whether used in analog television or digital television. Products with high sensitivity optical receiver tube and  special low noise matching circuit. Receiving at high optical power can be adjusted by PAD level, played limiting output, so SR2020AW within a large dynamic range of the received optical power of +2 dBm ~-21dBm, have excellent characteristics.

Triple play, fiber to the home, using the SR2020AW can save a lot of optical fiber amplifier power resources. For operators, can greatly reduce the cost of building the network.



2.0 PRODUCT FEATURE

1. Extra-low noise(3.8% modulate, -10dBm receive, CNR ≥ 45.3dB)

2. Wide dynamic receiving optical power range: within Pin=-16, MER≥36.1dB

3. Applicable GPON, EPON, compatible with any FTTx PON technology

4. Can save a large number of optical power resource, greatly reduce the network

 configuration cost

5. Within 47~1000MHz bandwidth, all with excellent flatness feature ( FL≤±0.75dB )

6. Metal case, offer safeguard for optoelectronic sensitive devices

7. High output level, can be used by many users

8. Low power consume, high performance, high cost performance

 

3.0 MAIN APPLICATION

1.       CATV FTTH

2.       Integration of three network

3.       FTTH PON

 

4.0 STATUS INDICATION

1. Red:     No optical input or optical power < -16dBm

2. Green:   Optical power range >-16dBm



Technical Index


Performance

Index

Supplement

 



Optic Feature

CATV Work wavelength

(nm)

1540~1563


Pass wavelength

(nm)

1310, 1490

Channel Isolation

(dB)

≥40

1550nm &1490nm

Responsibility

(A/W)

≥0.85

1310nm
≥0.91550nm

Receiving power

(dBm)

+2~-18

Analog TV   (CNR>45dB)



+2~-20Digital TV   (MER>30dB)

Optical return loss

(dB)

≥55
Optical fiber   connector


SC/APC

RF Feature

Work bandwidth

(MHz)

47~1000


Flatness

(dB)

≤±0.75

47~1000MHz

Output level

(dBμV)

>78

Pin=-1~-14dBm AGC

Return loss

(dB)

≥14

47 ~ 862MHz

Output impedance

(Ω)

75
Output port Number


1
RF tie-in


F-Female

Analog TV

Link Feature

Test channel

(CH)

59CH(PAL-D)


OMI

(%)

3.8

CNR1

(dB)

53.3

Pin=-2dBm

CNR2

(dB)

45.3

Pin=-10dBm

CTB

(dB)

≤-61

CSO

(dB)

≤-61

Digital TV

Link Feature

OMI

(%)

4.3


MER

(dB)

≥36

Pin=-16dBm
≥30Pin=-20dBm

BER

(dB)

<1.0E-9

Pin:+2~-21dBm

General Feature

Power supply

(V)

DC+12V

±1.0V

Power Consume

(W)

≤3

+12VDC, 210mA

Work Temp

(℃)

-20 ~ +55

Storage Temp

(℃)

-40 ~ 85
Work relative temp

(%)

5 ~ 95

Size

(mm)

50×88×22


Application of Fiber node CATV optical receiver

application of Fiber node CATV optical receiver


Production Progress

production node


Company information


We have more than 100 staff, 10% of them are senior technicians. With more than 1,000 square meters standards production assembling lines, we have strict QC procedures. Each unit of our product will go through 3 layer QC procedures, material checking before production, stabililty and performance testing after production, packing detection before delivery.


Most of our products are exported to South America, Russia, and North European countries. Currently, Softel has its branch office in Mexico and will launch another office in Colombia, continuing supplying for numerous agents, integrated dealers, and equipment producers all over the world.


Through keen international business competition in good faith, all of our staff members feel a big accomplishment & work under heavy responsibility. In addition, we are much proud of providing our invaluable customers with our high quality, high reliability, high efficiency, and competitive products.



Our mission will be to build creative solutions to consumers with a great experience for Fiber Opitc Wdm FTTH Optical Node for Pon CATV FTTH Optical Receiver Node. Our company attaches great importance to the management of corporate culture. By establishing a corporate culture suitable for the survival and development of the enterprise, it has become an inexhaustible driving force for the development of our company. With the continuous strengthening of economic globalization, our company constantly improves our competitiveness and expands our competitive advantage by means of merger to seize the international market.

Send Inquiry

whatsapp

teams

E-mail

Inquiry