Hot Selling IP to DVB-T Modulator with Factory Wholesale Price
Product quality is the cornerstone of a company's survival, and user needs are the goal of the company's efforts. We will continue to work hard for the development of 1X16 PLC Splitter Box With FWDM, 220V Ftth Catv Optical Receiver, EOC Slave Wifi, and strive to meet the needs of new and old users. Our company will combine China's local advantages and international resources organically and constantly forge ahead in China and the international market. On the basis of summarizing the practical experience of our company's international operation, we put forward a strategic implementation system of our company's international operation to support our company's international operation.
IP to dvb-t modulator
IP to DVB-T modulator is an all-in-one device developed by us. It has 8 multiplexing channels and 8 DVB-T modulating channels, and supports maximum 1024 IP input through the GE port and 8 non-adjacent carriers (50MHz~960MHz) output through the RF output interface. The device is also characterized with high integrated level, high performance and low cost. This is very adaptable to newly generation DTV broadcasting system.
FEATURES of IP to DVB-T modulator
2 GE input, SFP interface
Supports up to 1024 channels TS over UDP/RTP, unicast and multicast, IGMP v2\v3
Max 840Mbps for each GE input
Supports accurate PCR adjusting
Supports PID remapping and PSI/SI editing
Supports up to 180 PIDS remapping per channel
Support 8 multiplexed TS over UDP/RTP/RTSP output
8 DVB-T non-adjacent carriers output, compliant to ETSI EN300 744 standard
Supports RS (204,188) encoding
Support Web-based Network management
Specification of IP to DVB-T modulator
Input | Input | 512×2 IP input, 2 100/1000M Ethernet Port (SFP) |
Transport Protocol | TS over UDP/RTP, unicast and multicast, IGMP V2/V3 | |
Transmission Rate | Max 840Mbps for each input channel | |
Mux | Input Channel | 1024 |
Output Channel | 8 | |
Max PIDs | 180 per channel | |
Functions | PID remapping(auto/manually optional) | |
| PCR accurate adjusting | ||
| PSI/SI table automatically generating | ||
Modulation Parameters | Channel | 8 |
Modulation Standard | ETSI EN300 744 | |
Constellation | QPSK/16QAM/64QAM | |
Bandwidth | 6/7/8 MHz | |
Trans mode | 2K/4K/8K | |
FEC | 1/2, 2/3, 3/4, 5/6, 7/8 | |
RF Output | Interface | F typed output port for 8 non-adjacent carriers |
RF Range | 50~960MHz, 1kHz stepping | |
Output Level | -20~+10dbm (for all carriers), 0.5db stepping | |
MER | ≥ 40dB | |
ACL | -55 dBc | |
TS output | 8 IP output over UDP/RTP/RTSP, unicast/multicast, 2 100/1000M Ethernet Ports | |
System | Web-based Network management |
Environment requirement
Item | Requirement |
Machine Hall Space | When user installs machine frame array in one machine hall, the distance between 2 rows of machine frames should be 1.2~1.5m and the distance against wall should be no less than 0.8m. |
Machine Hall Floor | Electric Isolation, Dust Free Volume resistivity of ground anti-static material: 1X107~1X1010W, Grounding current limiting resistance: 1M (Floor bearing should be greater than 450Kg/㎡) |
Environment Temperature | 5~40℃(sustainable ), 0~45℃(short time) installing air-conditioning is recommended |
Relative Humidity | 20%~80% sustainable 10%~90% short time |
Pressure | 86~105KPa |
Door & Window | Installing rubber strip for sealing door-gaps and dual level glasses for window |
Wall | It can be covered with wallpaper, or brightness less paint. |
Fire Protection | Fire alarm system and extinguisher |
Power | Requiring device power, air-conditioning power and lighting power are independent to each other. Device power requires AC power 220V ±10% 50/60Hz or 110V ±10% 50/60Hz. Please carefully check before running. |
Grounding Requirement
All function modules’ good grounding is the basis of reliability and stability of devices. Also, they are the most important guarantee of lightning arresting and interference rejection. Therefore, the system must follow this rule.
Coaxial cables’ outer conductor and isolation layer should keep proper electric conducting with the metal housing of device.
Grounding conductor must adopt copper conductor in order to reduce high frequency impedance, and the grounding wire must be as thick and short as possible.
Users should make sure the 2 ends of grounding wire well electric conducted and be antirust.
It is prohibited to use any other device as part of grounding electric circuit
The area of the conduction between grounding wire and device’s frame should be no less than 25mm2.
Company information
Shipping
1, Fedex/DHL/UPS/TNT for samples, door to door.
2, By air or by sea for bulk goods, for FCL; Air port/port receiving
3, Customers specifying freight forwarders or negotiable shipping method
4, Delivery time: 1-3 days for samples; 10-30 day for bulk goods
FAQ
1. What are the payment terms that you support?
Usually, we accept T/T, PayPal, Western Union, and Alibaba Trade Assurance. You can select the terms of payment which is more convenient for you.
2. What about the lead time?
Usually, if there's stock, we ship the goods within 3~5 working days after the deposit is confirmed. If it is out of stock, the lead time depends.
3. How about the shipping?
When the package is small, we normally choose FedEx, DHL, TNT, and UPS and so on, while the goods have high weight and volume, we suggest using air or sea shipment.
We'll make each hard work to become excellent and excellent, and speed up our measures for standing from the rank of intercontinental top-grade and high-tech enterprises for Hot Selling IP to DVB-T Modulator with Factory Wholesale Price. We accelerate the scientific management and become a well-known brand enterprise with international competitiveness. We feel that a passionate, ground breaking and well-trained workforce can create fantastic and mutually useful business associations with you quickly.
You Might Also Like
Send Inquiry