CATV Receiver with WDM
Build-in WDM
Input Wavelength: 1310/1550nm; CATV Operating: 1540~1563nm.
CATV Receiver with WDM
SR100 series CATV converter for digital television, fiber to the home. When the input optical power output level Pin=-1dBm, Vo=6 8dB V, can be economically and flexibly apply the integration of three networks, fiber to the home network application.
SR100F-WD, CATV Receiver with WDM, adopts the high sensitivity optical receiving tube, without power supply, no power consumption.
Specifications
| CATV Receiver with WDM | Optic feature | Index | Supplement |
Optical parameter | CATV work wavelength | 1540~1563 nm | |
Pass wavelength | 1310~1490 nm | ||
Channel Isolation | ≥40 dB | ||
Response | ≥0.85 A/W | 1310nm | |
≥0.9 A/W | 1550nm | ||
Receiving Power | +2~-14 dBm | ||
Optical return loss | ≥55 dB | ||
Optical fiber connector | SC/APC | ||
RF parameter | Work bandwidth | 45~1050 MHz | |
Output level | >68 dBμV | Digital TV (pin=-1dBm) | |
Return loss | ≥14 dB | 47~862MHz | |
Output impedance | 75 Ω | ||
Output port number | 1 | ||
RF tie-in | F-female | ||
General feature | Work temp | -20~+55 ºC | |
Storage temp | -40~+85 ºC | ||
Work relative temp | 5~95 ºC |
Note
1. SR100, SR100-WF, SR100F, SR100F-WF and set top box (STB) of the RF input port directly connected. SR100-WD for user wiring box.
2. When using the RF connector, and the RF input interface must be tightened to STB. Otherwise the ground is bad and will cause high frequency segments Digital TV signals MER degradation.
3. Keep the optical connector clean, the bad link will cause too low RF output level.
Hot Tags: CATV receiver with WDM, China, manufacturers, suppliers, factory, wholesale, Ftth Fiber Optical Node, 220V Ftth Catv Optical Receiver, Passive Cable Tv Optical Node, FTTH Micro O E Converter Optical Receiver, FTTH CATV Optical Receiver With 1550nm Filter, Optical Transmitters
You Might Also Like
Send Inquiry