XGS-PON FTTH CATV Optical Passice Node
SRXG-100WD FTTH CATV Passive Node
1.0 Brief introduction of SRXG-100WD FTTH CATV Passive Node
SRXG-100WD CATV converter is for digital television, fiber to the home. This machine adopts the high sensitivity optical receiving tube, without power supply, no power consumption. When the input optical power output level Pin=-1dBm, Vo=68dBuV, economic, flexible application integration, application of fiber to the home network. It is Built-in CWDM, suitable for single-fiber triple wavelength system, CATV operating Wavelength 1550nm, pass wavelength 1270/1577nm and 1310/1490nm, can conveniently connect the ONU of EPON, GPON, XG -PON.
2.0 Product feature of SRXG-100WD FTTH CATV Passive Node
1. No Power required
2. Work bandwidth 45~1050MHz
3.0 Test data of SRXG-100WD FTTH CATV Passive Node
4.0 Technical index of SRXG-100WD FTTH CATV Passive Node
Items | Optic feature | Unit | Index | Supplement |
| Optic Feature | CATV Work wavelength | (nm) | 1540~1560 | |
Pass wavelength | (nm) | 1270/1577 | ||
Channel Isolation | (dB) | ≥40 | 1550nm&1490nm | |
Receiving power | (dBm) | +1~-15 | ||
Optical return loss | (dB) | ≥55 | ||
| Optical fiber connector | SC/APC | input | ||
RF Feature | Work bandwidth | (MHz) | 45~1050MHz | |
Output level | (dBμV) | 61.9 - 64.4 | Digital TV (Pin=-1dBm) | |
Return loss | (dB) | ≥14 | 47~862MHz | |
Output impedance | (Ω) | 75 | ||
| Output port number | 1 | |||
| RF tie-in | F-Female | |||
Digital TV eature | OMI | (%) | 4.3 | |
MER | (dB) | 34.7 - 35.5 | Pin=-1dBM | |
| 28.7 - 31 | Pin=-13dBm | |||
| BER | <1.0E-9 | Pin:+1~-15dBm | ||
General feature | Work temp | (℃) | -20~+55 | |
Storage temp | (℃) | -40~85 | ||
Work relative temp | (%) | 5~95 |
5.0 Product Series of SRXG-100WD FTTH CATV Passive Node
| Model | Input wavelength | CATV Operating | Data pass | Output Fiber | Input Fiber |
| SRXG-100WD | 1270, 1577, 1310, 1490, 1550nm | 1540~1560nm | 1270/1577nm 1310/1490nm | SC/UPC OR SC/APC | SC/APC |
6.0 Note of SRXG-100WD FTTH CATV Passive Node
1. When using the RF connector, and the RF input interface must be tightened to STB. Otherwise the ground is bad and will cause high frequency segments Digital TV signals MER degradation.
2. Keep the optical connector clean, the bad link will cause too low RF output level.
Other products:
olt, onu, optical transmitter& receiver, edfa, connector, terminal box, FOSC, patch cord, fiber cable, modulator, encoder, coaxial cable, taps, satellite optical transmitter&receiver, android tv box and etc.
Shipping & packaging
Hot Tags: xgs-pon ftth catv optical passice node, China, manufacturers, suppliers, factory, wholesale, High Quality Passive Optical Receiver, FTTH Micro O E Converter Optical Receiver, Micro Optical Receiver, Optical Receiver Wdm, Passive Optical Receiver, Optical Transmitters
Previous
Ftth Mini NodeYou Might Also Like
Send Inquiry