16 Ports Multiport Optical Amplifier EDFA with Wdm
Our company has very rich practical experience in the field of Passive Optical Receiver With WDM, Turner, ASI, IP Input Qam Modulator, Passive Cable Tv Optical Node, relying on a perfect management system and after-sales service, and strive to make our customers satisfied with our products. Over the past few years, tens of thousands of new and old customers have established cooperative relations with our company, and they have given a very high evaluation of our products and after-sales services. The company's products are sold at home and abroad.
16 ports EDFA Optical Amplifier
I. Product Overview
16 Ports EDFA Optical Amplifier is a low noise high-performance Er Yb co-doped fiber amplifier. Each output built-in CWDM (1310/1490/1550) wavelength division multiplexer. Conveniently multiplex the data stream of OLT and ONU to thefiber amplifier output by 1310nm and 1490nm optical connector. Thus reduced the equipment quantity, improved the system indexes and reliability. It is the ideal equipment for FTTx network, provides a flexible and low cost solution for the integration of three networks and the FTTH.
Characteristics of 16 Ports EDFA Optical Amplifier
1, Adopts Er Yb Co-doped double-clad fiber technology;
2, Output ports: 4-16 optional;
3, Optical output power: total output up to 5W;
4, Low noise figure: <5dB when input is 0dBm;
5, Perfect network management interface, in line with standard SNMP network management;
6, Intelligent temperature control system make the power consumption lower;
Detailed image of 16 ports EDFA Optical Amplifier
Product parameters of 16 ports EDFA Optical Amplifier
|
Item |
Unit |
Technique parameters |
|
|
CATV pass through wavelength |
nm |
1545 - 1565 |
|
|
PON pass through wavelength |
nm |
1260 - 1360 1480 - 1500 |
|
|
PON insertion loss |
dB |
<0.8 |
|
|
Isolation |
db |
>15 |
|
|
CATV optical input power range |
dBm |
-3 - +10 |
|
|
Maximum optical output power |
dBm |
36 |
|
|
Output power stability |
dBm |
±0.5 |
|
|
Noise figure |
dB |
≤ 5.0 (Optical input power 0dBm, λ=1550nm) |
|
|
Return loss |
Input |
dB |
≥ 45 |
|
Output |
dB |
≥ 45 |
|
|
Optical Connector Type |
SC/APC |
||
|
C/N |
dB |
≥ 50 |
Test condition according to GT/T 184-2002. |
|
C/CTB |
dB |
≥ 63 |
|
|
C/CSO |
dB |
≥ 63 |
|
|
Power supply voltage |
V |
A: AC160V - 250V(50 Hz); B: DC48V |
|
|
Consumption |
W |
≤ 70 |
|
|
Operating temperature range |
°C |
-10 - +42 |
|
|
Maximum operating relative humidity |
% |
Max 95% no condensation |
|
|
Storage temperature range |
°C |
-30 - +70 |
|
|
Maximum storage relative humidity |
% |
Max 95% no condensation |
|
|
Dimension |
mm |
483(L)× 440(W)× 88(H) |
Other products such as optical transmitter, olt, edfa, fiber optic node, onu and etc.
Company information
We have more than 100 staff, 10% of them are senior technicians. With more than 1,000 square meters standards production assembling lines, we have strict QC procedures. Each unit of our product will go through 3 layer QC procedures, material checking before production, stabililty and performance testing after production, packing detection before delivery.
Most of our products are exported to South America, Russia, and North European countries. Currently, Softel has its branch office in Mexico and will launch another office in Colombia, continuing supplying for numerous agents, integrated dealers, and equipment producers all over the world.
Through keen international business competition in good faith, all of our staff members feel a big accomplishment & work under heavy responsibility. In addition, we are much proud of providing our invaluable customers with our high quality, high reliability, high efficiency, and competitive products.
FAQ
Q: What is Erb Yb co-doped fiber amplifier?
A: The Erb Yb co-doped fiber amplifier is an optical amplifier based on optical fibers as the gain medium, and the core of the fiber is doped with both erbium (Er³⁺) and ytterbium (Yb³⁺) ions. During operation, the ytterbium ion first absorbs the pump light energy and efficiently transmits the energy to the erbium ion through the energy transfer mechanism, so that the erbium ion realizes the inversion of the particle number, and then amplifies the signal light of a specific wavelength (mainly around 1550nm in the communication band). This co-doped structure combines the advantages of ytterbium ion absorption pump wide range (suitable for high-power pump source) and erbium ion in the communication band gain characteristics, with high gain, high output power, low noise and other characteristics, and is widely used in optical fiber communication systems, optical fiber sensing, lidar and other fields, and is one of the key signal amplifier devices in modern optical communication networks.
Q: How does the Yb co-doped fiber amplifier work?
A: EYDFA "assists" erbium ions to efficiently absorb energy through ytterbium ions, and uses the gain characteristics of erbium ions in the communication band to achieve signal amplification, which combines high pumping efficiency, high gain and wide band amplification capabilities.
In the development of our company, we actively advocate taking the market as the guidance, service as the engine, innovation as the driving force, reputation as the foundation, and actively expand the domestic and foreign 16 Ports Multiport Optical Amplifier EDFA with Wdm market. On the premise of strictly selecting products, we use professional technical services to reduce the cost of use for customers, improve production efficiency and equipment life cycle, and achieve mutual benefit, win-win and common development. Our products have the characteristics of exquisite workmanship and durability.
You Might Also Like
Send Inquiry