Direct Modulated AGC Fiber 1310nm Optical Transmitter (HT8300)
The 16 In 1 Agile CATV Analog Modulator, 1U Rack Mount PLC Splitter, Indoor Fiber Termination Box provided by us has excellent features, which make our product different from other similar products. We have professional designers to provide you with solutions, and our delivery time and quality are guaranteed. All of our employees have depicted the history of our company's dramatic development with faithfulness, passionate attitude and responsible actions. We adhere to the development concept of scientific and technological innovation, and vigorously promote technological research and development and technological innovation. We insist on improving our operating efficiency and profitability, expanding our business scale and improving our competitiveness.
Outdoor Optical Node
Brief introduction of outdoor optical node
Outdoor optical node is our latest high-grade two-output CATV network optical receiver. The pre-amplifier adopts full-GaAs MMIC, post-amplifier adopts GaAs module. Optimized circuit design coupled with our 10 years professional design experience, make the equipment achieve good performance indexes. Microprocessor control, digital display the parameters, the engineering debug is especially easy. It is the main equipment to build the CATV network.
Performance Characteristics of outdoor optical node
1, High response PIN photoelectric conversion tube.
2, Specialized RF attenuation chip, with good RF attenuation and equilibrium linear, high accuracy.
GaAs amplifier device, power doubly output, with high gain and low distortion.
3, Excellent AGC performance, when the input optical power range is －9～＋2dBm, the output level keep unchanged, CTB and CSO basically unchanged.
4, Reserved data communication interface, can connect with class Ⅱ network management responder, access to network management system.
Technical Parameter of outdoor optical node
Item | Unit | Technical Parameters | |
Forward optical receiving part | |||
Optical Parameters | |||
Receiving Optical Power | dBm | -9 ~ +2 | |
Optical Return Loss | dB | >45 | |
Optical Receiving Wavelength | nm | 1100 ~ 1600 | |
Optical Connector Type | FC/APC, SC/APC or specified by the user | ||
Fiber Type | Single Mode | ||
Link Performance | |||
C/N | dB | ≥ 51（-2dBm input） | |
C/CTB | dB | ≥ 65 | Output Level 108 dBμV Balanced 6dB |
C/CSO | dB | ≥ 60 | |
RF Parameters | |||
Frequency Range | 45 ~862 | 45 ~1003 | |
Flatness in Band | dB | ±0.75 | ±0.75 |
Rated Output Level | dBμV | ≥ 108 | ≥ 108 |
Max Output Level | dBμV | ≥ 114 | ≥ 112 |
Output Return Loss | dB | （45 ~550MHz）≥16/(550~1000MHz)≥14 | |
Output Impedance | Ω | 75 | 75 |
Electronic Control EQ Range | dB | 0～10 | 0～10 |
Electronic Control ATT Range | dBμV | 0～20 | 0～20 |
Return Optical Emission Part | |||
Optical Parameters | |||
Optical Transmit Wavelength | nm | 1310±10, 1550±10 or specified by the user | |
Output Optical Power | mW | 0.5, 1, 2 | |
Optical Connector Type | FC/APC, SC/APC or specified by the user | ||
RF Parameters | |||
Frequency Range | MHz | 5 ~ 65（or specified by the user） | |
Flatness in Band | dB | ±1 | |
Input Level | dBμV | 72 ~ 85 | |
Output Impedance | Ω | 75 | |
NPR dynamic range | dB | ≥15（NPR≥30 dB） Use DFB laser | ≥10（NPR≥30 dB） Use FP laser |
General Performance | |||
Supply Voltage | V | A：AC（150~265）V；B：AC（35~90）V | |
Operating Temperature | ℃ | -40~60 | |
Storage Temperature | ℃ | -40~65 | |
Relative Humidity | % | Max 95% no condensation | |
Consumption | VA | ≤ 30 | |
Dimension | mm | 260（L）╳ 200（W）╳ 130（H） | |
Function Display and Operating Instruction
Mode: Mode selection button, total seven operating modes.
▲: up button. Increase the attenuation or equilibrium in the ATT or EQ mode.
▼: down button. Decrease the attenuation or equilibrium in the ATT or EQ mode.
The following is the detailed instructions：
Application of outdoor optical node
Company information
We have more than 100 staff, 10% of them are senior technicians. With more than 1,000 square meters standards production assembling lines, we have strict QC procedures. Each unit of our product will go through 3 layer QC procedures, material checking before production, stabililty and performance testing after production, packing detection before delivery.
Most of our products are exported to South America, Russia, and North European countries. Currently, Softel has its branch office in Mexico and will launch another office in Colombia, continuing supplying for numerous agents, integrated dealers, and equipment producers all over the world.
Through keen international business competition in good faith, all of our staff members feel a big accomplishment & work under heavy responsibility. In addition, we are much proud of providing our invaluable customers with our high quality, high reliability, high efficiency, and competitive products.
FAQ
1. What are the payment terms that you support?
Usually, we accept T/T, PayPal, Western Union, and Alibaba Trade Assurance. You can select the terms of payment which is more convenient for you.
2. What about the lead time?
Usually, if there's stock, we ship the goods within 3~5 working days after the deposit is confirmed. If it is out of stock, the lead time depends.
3. How about the shipping?
When the package is small, we normally choose FedEx, DHL, TNT, and UPS and so on, while the goods have high weight and volume, we suggest using air or sea shipment.
4. How can I place an order?
(1) Negotiation is agreed upon for the product price and specifications.
(2) The Proforma invoice will be sent for confirmation.
(3) After the agreement on the proforma invoice, the customer makes the deposit.
(4) Manufacturing will be started as soon as the payment is confirmed by our bank.
(5) Ship out the goods within the agreed delivery deadline.
Through the continuous optimization of the process, we improve the quality of Direct Modulated AGC Fiber 1310nm Optical Transmitter (HT8300) and save costs. If you need to have any of our merchandise, or have other items to be produced, make sure you send us your inquiries, samples or in depth drawings. So please make contact with us by sending us emails or call us if you have any questions about our corporation.
You Might Also Like
Send Inquiry