Direct Modulated AGC Fiber CATV 1310nm Optical Transmitter (HT8300)

Direct Modulated AGC Fiber CATV 1310nm Optical Transmitter (HT8300)

The internal micro-processor software has many functions such as laser monitoring, number display, trouble alarm and on-line management.
Send Inquiry
Product Introduction

Since the establishment of our company, we have been abiding by quality-oriented, customer-first and sincere cooperation to promote our quality CATV Trunk Amplifier With Return Path, 8 Channel CWDM MUX, Dual Mode 1GE 1FE CATV ONT to a broader global market. We are committed to becoming an enterprise with advanced technology, strong development capabilities, comprehensive production capabilities, complete product categories and customer satisfaction. The responsibilities and missions are the sources of motivation for the company's continuous development or advancement. We hope that on the basis of maintaining the existing market advantages, we will actively develop in the direction of market demand, ability to develop, and competitive advantages.

ST1300 adopts high linearity ORTOL DFB laser, build-in perfect pre-distortion adjustment circuit and laser APC,ATC closed loop control circuit. All the operating parameters are controlled by micro-processor, The LCD screen on the front panel can display relative operating status and the fault information.

CATV 1310nm Optical Fiber Transmitters

Features

This CATV 1310nm Optical Fiber transmitter adopt the imported DFB laser named Agere (ORTEL、Lucent),Mitsubishi、Fujisu、AOI and so on.

The internal RF driving amplifier and controlling circuit of this machine can ensure the best C/N. The perfect and stable circuit of optic power output and controlling circuit of thermoelectric refrigeration device of laser module assure the user the best quality and stable working for a long time.

The internal micro-processor software has many functions such as laser monitoring, number display, trouble alarm and on-line management. Once the working parameter of the laser is out of the fixed range, there will be a red light glistening to alarm.

The RS-232 standard connector makes it is possible to manage on line and monitor in another place.

The machine adopts 19”standard shelf and it can work with the voltage from 110V to 254V.


Technical Parameters

Model(ST1310)

-2

-4

-6

-8

-10

-12

-14

-16

-18

-20

Optic Power (mW)

≥02

≥04

≥06

≥08

≥10

≥12

≥14

≥16

≥18

≥20

Optic Power (dBm)

3.0

6.0

7.8

9.0

10.0

10.8

11.5

12.0

12.3

12.8

Optic Wavelength (nm)

1290~1310

Fiber Connector

FC/APC、SC/APC、SC/UPC (Selected by the Customer)

Working Bandwidth (MHz)

47~862

Channels

59

CNR (dB)

≥51

CTB (dBc)

≥65

CSO (dBc)

≥60

RF Input Level (dBμV)

Not with pre-distortion

78±5

With pre-distortion

83±5

Band Unflatness

≤0.75

Power Consumption (W)

≤30

Power Voltage (V)

220V(110~254)

Working Tem (℃)

0~45

Size (mm)

483×370×44


Warranty Term

CATV 1310nm Optical Fiber transmitters are covered by ONE YEAR Limited Warranty, which starts from the initial date of your purchase. We provide its customer whole-life technical supports. If warranty is expired, repair service only charges parts (if required). In the event that a unit must be returned for service, before returning the unit, please be advised that:

1.Warranty mark pasted on the housing of unit must be in good conditions.

2.A clear and readable material describes model number, serial number and troubles should be offered.

3.Please pack the unit in its original container. If the original container is no longer available, please pack the unit in at least 3 inches of shock absorbing material.

4.Returned unit(s) must be prepaid and insured. COD and freight collect can not be acceptable.

NOTE: we do not assume responsibility for damage caused by improper packing of returned unit(s).


The following situation is not covered by warranty:

1.The unit fails to perform because of operators’ faults.

2.Warranty mark is modified, damaged and/or removed.

3.Damage caused by Force Majeure.

4.The unit has been unauthorized alteration and/or repaired.

5.Other troubles caused by operators’ faults.


Conversion of Optical Power

mW

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

dBm

0.0

3.0

4.8

6.0

7.0

7.8

8.5

9.0

9.5

10.0

10.4

10.8

11.1

11.5

11.8

12.0

mW

17

18

19

20

21

22

25

32

40

50

63

80

100

125

160

200

dBm

12.3

12.5

12.8

13.0

13.2

13.4

14

15

16

17

18

19

20

21

22

23

By adhering to high-quality products and services, we ensure that we never lower the quality of our Direct Modulated AGC Fiber CATV 1310nm Optical Transmitter (HT8300) for reasons of competitiveness. The team spirit is the soul of an enterprise and an inexhaustible driving force for the sustainable development of an enterprise. We have vigorously implemented the talent development strategy, and formed a fair and equitable employment mechanism that embraces all the talents.

Send Inquiry

whatsapp

teams

E-mail

Inquiry