Eoc Modem 4fe Eoc Slave

Eoc Modem 4fe Eoc Slave

EOS-402-W terminal equipment is used to construct two-layer Ethernet transmission channel in CATV Cable network. Transmit and receive the Ethernet signals by CATV coaxial cable, without affecting the existing CATV signals.
Send Inquiry
Product Introduction

The Modulators, PLC Splitter, Epon Onu 1ge 1fe Wifi Catv we produced have the characteristics of stable performance, high precision, and low processing loss. We believe that professionalism will not become an obstacle to communication. Providing mature, efficient, simple and practical products is the prerequisite for creating new value. Innovation is our eternal pursuit with the hope of seeking development through technological innovation and creating benefits through management innovation. Our company with good reputation, perfect after-sales service, customer first management belief, sincerely welcome friends from all walks of life at home and abroad to cooperate sincerely.

EOS-402-W terminal equipment is used to construct two-layer Ethernet transmission channel in CATV Cable network. Transmit and receive the Ethernet signals by CATV coaxial cable, without affecting the existing CATV signals.

Ethernet Over Coax Slave Unit

EOS-402-W coaxial cable broadband access terminal adopts the industry recognized solution HomePlug AV AR7411. Connect with slave equipment via coaxial WAN port. Local provide four 100M full-duplex Ethernet interface, can simultaneously connect with computer, digital TV set-top box, IP telephones, etc. Provide wireless WIFI 11N router function, use wireless WIFI access to the Internet. 

This Ethernet over Coax Slave Unit supports two SSID as required. One for operator’s network maintenance, another for user’s wireless internet access, based on IEEE802.11n standard, can extend the wireless network scope; provide stable transmission up to 150Mbps. It is compatible with IEEE802.11b and IEEE802.11g standards.


Features

EOS-402-W user side has two accounts with different permissions: maintenance account and home gateway user account. Users log in use username and password to configure or manage on EOS-402-W. WAN connection of EOS-402-W supports four subinterface settings. Build independent channels of management, video services, voice services and internet services. WAN connection can add, modify and delete the subinterface. Each subinterface has routing mode and bridge mode.

EOS-402-W as a data hub of home network and external network, can classify the data stream according to user side interfaces (including wired and wireless interface) service discovery results, QoS adaptive the different data stream; support bandwidth control, can limit the maximum upstream bandwidth and downstream bandwidth of each subnet bridge, to prevent the entire Cable transmission network impact when user side other network equipment is abnormal or has man-made attack. Support priority identification, identify data packages of specific service (such as RTP data flow) according to service discovery results, including 802.1d identification and DSCP identification. Support six priority queues and different scheduling algorithms, including: SP, DWRR and CAR.

EOS-402-W supports encryption transmission, protect the sensitive data.

eoc slave


Specification of Ethernet Over Coax Slave Unit

Roduct Model

EOS-402-W

Ports

WAN

One screw-thread Cable interface

LAN

Four 10/100M adaptive RJ45 port

TV

One CATV coaxial line interface

Supported standards and protocols

IEEE HomePlug AV, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE802.3u,

CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, NAT, PPPoE

WiFi Parameters

Frequency range

2.4~2.4835GHz

Transmission rate

11n: 270/243/216/162/108/81/54/27Mbps

135/121.5/108/81/54/40.5/27/13.5Mbps

130/117/104/78/52/39/26/13Mbps

65/58.5/52/39/26/19.5/13/6.5Mbps

IEEE 802.11g: 54/48/36/24/18/12/9/6 (self-adaptive)

IEEE 802.11b: 11/5.5/2/1M (self-adaptive)

Working channel number

13

Spread-spectrum technology

DSSS (Direct Sequence Spread Spectrum)

Data modulation

DBPSK, DQPSK, CCK and OFDM(BPSK/QPSK/16-QAM/64-QAM)

Sensitivity @ PER

(Packet Error Rate)

270M: -68dBm@10% PER; 130M: -68dBm@10% PER;

108M: -68dBm@10% PER; 54M: -68dBm@10% PER;

11M: -85dBm@8% PER; 6M: -88dBm@10% PER;

1M: -90dBm@8% PER; (typical value)

Transmission distance

Indoor 120m, outdoor 360m at most

(depend on the environment)

RF power

20dBm EIRP

Antenna

3dBi high-gain omnidirectional antenna

EOC Parameters

working frequency

7.5-65MHz

Output power

≥110dBuV

Modulation mode

OFDM

Physical layer bandwidth

700Mbps

IP layer throughput

Exclusive or shared 320Mbps

RF impedance

75Ω

CATV RF

Working band

87-1000MHz

Return Loss

>16dB

Insertion Loss

≤1dB

Network media

10Base-T: Category 3 or above 3 UTP; 100Base-TX: Category 5 UTP

LED Indicators

WAN

Normally on: connected; flashing: data transmission

LAN

Normally on: connected; flashing: data transmission

Others

Power(power supply), EOC (EOC chip initialization indicator),
Wifi (wireless indicator)

General Characteristics

Dimension (L×W×H)

180(mm)*110(mm)*31(mm)

Use environment

Working temperature: -20℃~55℃;
Working humidity: 10%~90% no condensation;
Storage temperature: -40℃~70℃;
Storage humidity: 5%~90%no condensation.

External power supply

Power adapter output: DC 12V/1A

In order to seek greater development, our company does not focus on the existing Eoc Modem 4fe Eoc Slave market, but actively explore new markets. Under the principle of 'quality derives from profession', we sincerely welcome all our friends from domestic and abroad o build business relationship with us! With the development goal of 'becoming bigger and stronger, standing in the same industry with pride', we have made continuous progress and offered high grade products and service to many customers.

Send Inquiry

whatsapp

teams

E-mail

Inquiry