Softel 32 in 1 DVB-C Modulator IP Qam Modulator

Softel 32 in 1 DVB-C Modulator IP Qam Modulator

The testing and inspection scheme already covers all the Optical, Electronic and Mechanical criteria which have been published by Softel .
Send Inquiry
Product Introduction

After years of development, with advanced R&D capabilities and professional operating capabilities, we have become a leading enterprise in the industry of Single Mode Simplex 3.0mm Patch Cord, Fiber Optic Cable Joint Splice Closure, 32 Channels IP Qam Modulator and occupy an important position. In order to seize the market opportunities, our company sincerely invites partners to create a new market. We strive to provide customers with the highest quality products, the most cost-effective solutions, and the fastest response speed.

32 Channels IP Qam Modulator SFT3332 has 32 multiplexing channels, 32 scrambling channels and 32 QAM (DVB-C) modulating channels, and supports Web-based Network management. It is also characterized with high integrated level, high performance and low cost.

IP Qam Modulator


Characteristic

2 GE input, Data1 and Data2 (SFP interface optional)

Supports up to 1024 channels TS over UDP/RTP, unicast and multicast, IGMP v2\v3

Max 840Mbps for each GE input

Supports accurate PCR adjusting/CA filtering, PID remapping and PSI/SI editing

Supports up to 256 PIDS remapping per channel

Support 32 multiplexed or scrambled TS over UDP/RTP/RTSP output

32 non-adjacent QAM carriers output, compliant to DVB-C (EN 300 429) and ITU-T J.83 A/B

Supports RS (204,188) encoding


Technial Parameters of 32 Channels IP Qam Modulator

Input

Input

512×2 IP input, 2*100/1000M Ethernet Port(SFP interface optional)

Transport Protocol

TS over UDP/RTP, unicast and multicast, IGMP V2/V3

Transmission Rate

Max 840Mbps for each GE input

Mux

Input Channel

1024

Output Channel

32

Max PIDs

256 per channel

Functions

PID remapping(auto/manually optional)

PCR accurate adjusting

PSI/SI table automatically generating

Scrambling
Parameters

Max simulscrypt CA

4

Scramble Standard

ETR289, ETSI 101 197, ETSI 103 197

Connection

Local/remote connection

Modulation
Parameters

DVB-C Modulator Sectioon

J.83A

Constellation : 16/32/64/128/256QAM

Bandwidth :8M

J.83B

Constellation : 64QAM/ 256QAM

Bandwidth :6M

QAM Channel

32 non-adjacent carrier

Modulation Standard

EN300 429/ITU-T J.83A/B(DVB-C)

Symbol Rate

5.0~7.0Msps, 1ksps stepping

Constellation

16, 32, 64 , 128, 256QAM

FEC

RS (204, 188)

RF Output

Interface

1 F typed output port for 32 carriers, 75Ω

RF Range

50~960MHz, 1kHz stepping

Output Level

-20dBm~+10dBm(87~117dbµV), 0.1dB stepping

MER

≥ 40dB

TS output

32 IP output over UDP/RTP/RTSP, unicast/multicast, 2*100/1000M Ethernet Ports (SFP)

System

Network management software (NMS) supporting

General

Demission

420mm×440mm×44.5mm (WxLxH)

Temperature

0~45℃(operation), -20~80℃(storage)

Power Supply

AC 100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz


Troubleshooting

SOFTEL's ISO9001 quality assurance system has been approved by CQC organization. For guarantee the products' quality, reliability and stability. All Softel products have been passed the testing and inspection before ship out factory. The testing and inspection scheme already covers all the Optical, Electronic and Mechanical criteria which have been published by Softel . 

To prevent potential hazard, please strictly follow the operation conditions.


Prevention Measure

Installing the device at the place in which environment temperature between 0 to 45 °C.

Making sure good ventilation for the heat-sink on the rear panel and other heat-sink bores if necessary.

Checking the input AC voltage within the power supply working range and the connection is correct before switching on device.

Checking the RF output level varies within tolerant range if it is necessary

Checking all signal cables have been properly connected

Frequently switching on/off device is prohibited; the interval between every switching on/off must greater than 10 seconds.


Conditions need to unplug power cord

Power cord or socket damaged.

Any liquid flowed into device.

Any stuff causes circuit short

Device in damp environment

Device was suffered from physical damage

Longtime idle.

After switching on and restoring to factory setting, device still cannot work properly.

packaging

We are insisting on using integrated industry chain optimization to enhance core competitiveness so that we can continuously improve the quality of Softel 32 in 1 DVB-C Modulator IP Qam Modulator. We have always been quality-oriented, market-oriented, adhering to the concept of 'scientific management, high quality, and advanced technology', and always put technical standards, product quality and service quality in an important position. We are committed to the most positive and sincere attitude to provide customers with the best quality and efficient service.

Send Inquiry

whatsapp

teams

E-mail

Inquiry