Softel High Quality RF Modulator 8/16/32 Channels

Softel High Quality RF Modulator 8/16/32 Channels

The testing and inspection scheme already covers all the Optical, Electronic and Mechanical criteria which have been published by Softel .
Send Inquiry
Product Introduction

Our research and development level and production capacity have always been in a leading position in the industry of Outdoor 2 Output Trunk Amplifier, CATV FTTH OE Converter, Wall Mount Fiber Optic Patch Panel ODF. Products are distributed all over the world. We will focus on the road of transformation, ecology and shared development, and vigorously promote product structure adjustment. We hope to produce high-quality products independently, at the same time, to strengthen communication and cooperation with overseas companies with the aim of made in China and world cooperation.

32 Channels IP Qam Modulator SFT3332 has 32 multiplexing channels, 32 scrambling channels and 32 QAM (DVB-C) modulating channels, and supports Web-based Network management. It is also characterized with high integrated level, high performance and low cost.

IP Qam Modulator


Characteristic

2 GE input, Data1 and Data2 (SFP interface optional)

Supports up to 1024 channels TS over UDP/RTP, unicast and multicast, IGMP v2\v3

Max 840Mbps for each GE input

Supports accurate PCR adjusting/CA filtering, PID remapping and PSI/SI editing

Supports up to 256 PIDS remapping per channel

Support 32 multiplexed or scrambled TS over UDP/RTP/RTSP output

32 non-adjacent QAM carriers output, compliant to DVB-C (EN 300 429) and ITU-T J.83 A/B

Supports RS (204,188) encoding


Technial Parameters of 32 Channels IP Qam Modulator

Input

Input

512×2 IP input, 2*100/1000M Ethernet Port(SFP interface optional)

Transport Protocol

TS over UDP/RTP, unicast and multicast, IGMP V2/V3

Transmission Rate

Max 840Mbps for each GE input

Mux

Input Channel

1024

Output Channel

32

Max PIDs

256 per channel

Functions

PID remapping(auto/manually optional)

PCR accurate adjusting

PSI/SI table automatically generating

Scrambling
Parameters

Max simulscrypt CA

4

Scramble Standard

ETR289, ETSI 101 197, ETSI 103 197

Connection

Local/remote connection

Modulation
Parameters

DVB-C Modulator Sectioon

J.83A

Constellation : 16/32/64/128/256QAM

Bandwidth :8M

J.83B

Constellation : 64QAM/ 256QAM

Bandwidth :6M

QAM Channel

32 non-adjacent carrier

Modulation Standard

EN300 429/ITU-T J.83A/B(DVB-C)

Symbol Rate

5.0~7.0Msps, 1ksps stepping

Constellation

16, 32, 64 , 128, 256QAM

FEC

RS (204, 188)

RF Output

Interface

1 F typed output port for 32 carriers, 75Ω

RF Range

50~960MHz, 1kHz stepping

Output Level

-20dBm~+10dBm(87~117dbµV), 0.1dB stepping

MER

≥ 40dB

TS output

32 IP output over UDP/RTP/RTSP, unicast/multicast, 2*100/1000M Ethernet Ports (SFP)

System

Network management software (NMS) supporting

General

Demission

420mm×440mm×44.5mm (WxLxH)

Temperature

0~45℃(operation), -20~80℃(storage)

Power Supply

AC 100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz


Troubleshooting

SOFTEL's ISO9001 quality assurance system has been approved by CQC organization. For guarantee the products' quality, reliability and stability. All Softel products have been passed the testing and inspection before ship out factory. The testing and inspection scheme already covers all the Optical, Electronic and Mechanical criteria which have been published by Softel . 

To prevent potential hazard, please strictly follow the operation conditions.


Prevention Measure

Installing the device at the place in which environment temperature between 0 to 45 °C.

Making sure good ventilation for the heat-sink on the rear panel and other heat-sink bores if necessary.

Checking the input AC voltage within the power supply working range and the connection is correct before switching on device.

Checking the RF output level varies within tolerant range if it is necessary

Checking all signal cables have been properly connected

Frequently switching on/off device is prohibited; the interval between every switching on/off must greater than 10 seconds.


Conditions need to unplug power cord

Power cord or socket damaged.

Any liquid flowed into device.

Any stuff causes circuit short

Device in damp environment

Device was suffered from physical damage

Longtime idle.

After switching on and restoring to factory setting, device still cannot work properly.

packaging

Through on-time logistics delivery, our Softel High Quality RF Modulator 8/16/32 Channels will be delivered to customers quickly and safely. Our company adheres to the tenet of 'forge ahead and prosper', and will continue to serve new and old customers at home and abroad with first-class technology, products, and service. Welcome domestic and foreign customers to inquire and negotiate business. We always follow the value concept of science first, and constantly advance with scientific and technological innovation as the soul.

Send Inquiry

whatsapp

teams

E-mail

Inquiry