
Ethernet Over Coax Cable Modem Eoc Slave with WiFi
Since the establishment of our company, we have invested a lot of time and energy to study products and customer requirements, so that our EOC Slave Wifi, Outdoor EDFA, Catv Modulator 24 Channels are high-quality products with high market acceptance and good sales volume, which are favored by customers. Good service is an effective criterion for our company, which has earned us a number of loyal customers. We should innovate the service mode, optimize the service process, improve the service environment and pay attention to the service effect.
EOS-402-W terminal equipment is used to construct two-layer Ethernet transmission channel in CATV Cable network. Transmit and receive the Ethernet signals by CATV coaxial cable, without affecting the existing CATV signals.

EOS-402-W coaxial cable broadband access terminal adopts the industry recognized solution HomePlug AV AR7411. Connect with slave equipment via coaxial WAN port. Local provide four 100M full-duplex Ethernet interface, can simultaneously connect with computer, digital TV set-top box, IP telephones, etc. Provide wireless WIFI 11N router function, use wireless WIFI access to the Internet.
This Ethernet over Coax Slave Unit supports two SSID as required. One for operator’s network maintenance, another for user’s wireless internet access, based on IEEE802.11n standard, can extend the wireless network scope; provide stable transmission up to 150Mbps. It is compatible with IEEE802.11b and IEEE802.11g standards.
Features
EOS-402-W user side has two accounts with different permissions: maintenance account and home gateway user account. Users log in use username and password to configure or manage on EOS-402-W. WAN connection of EOS-402-W supports four subinterface settings. Build independent channels of management, video services, voice services and internet services. WAN connection can add, modify and delete the subinterface. Each subinterface has routing mode and bridge mode.
EOS-402-W as a data hub of home network and external network, can classify the data stream according to user side interfaces (including wired and wireless interface) service discovery results, QoS adaptive the different data stream; support bandwidth control, can limit the maximum upstream bandwidth and downstream bandwidth of each subnet bridge, to prevent the entire Cable transmission network impact when user side other network equipment is abnormal or has man-made attack. Support priority identification, identify data packages of specific service (such as RTP data flow) according to service discovery results, including 802.1d identification and DSCP identification. Support six priority queues and different scheduling algorithms, including: SP, DWRR and CAR.
EOS-402-W supports encryption transmission, protect the sensitive data.

Specification of Ethernet Over Coax Slave Unit
Roduct Model | EOS-402-W |
Ports | |
WAN | One screw-thread Cable interface |
LAN | Four 10/100M adaptive RJ45 port |
TV | One CATV coaxial line interface |
Supported standards and protocols | |
IEEE HomePlug AV, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE802.3u, CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, NAT, PPPoE | |
WiFi Parameters | |
Frequency range | 2.4~2.4835GHz |
| Transmission rate | 11n: 270/243/216/162/108/81/54/27Mbps 135/121.5/108/81/54/40.5/27/13.5Mbps 130/117/104/78/52/39/26/13Mbps 65/58.5/52/39/26/19.5/13/6.5Mbps |
IEEE 802.11g: 54/48/36/24/18/12/9/6 (self-adaptive) | |
IEEE 802.11b: 11/5.5/2/1M (self-adaptive) | |
Working channel number | 13 |
Spread-spectrum technology | DSSS (Direct Sequence Spread Spectrum) |
Data modulation | DBPSK, DQPSK, CCK and OFDM(BPSK/QPSK/16-QAM/64-QAM) |
Sensitivity @ PER (Packet Error Rate) | 270M: -68dBm@10% PER; 130M: -68dBm@10% PER; 108M: -68dBm@10% PER; 54M: -68dBm@10% PER; 11M: -85dBm@8% PER; 6M: -88dBm@10% PER; 1M: -90dBm@8% PER; (typical value) |
Transmission distance | Indoor 120m, outdoor 360m at most (depend on the environment) |
RF power | 20dBm EIRP |
Antenna | 3dBi high-gain omnidirectional antenna |
EOC Parameters | |
working frequency | 7.5-65MHz |
Output power | ≥110dBuV |
Modulation mode | OFDM |
Physical layer bandwidth | 700Mbps |
IP layer throughput | Exclusive or shared 320Mbps |
RF impedance | 75Ω |
CATV RF | |
Working band | 87-1000MHz |
Return Loss | >16dB |
Insertion Loss | ≤1dB |
Network media | |
10Base-T: Category 3 or above 3 UTP; 100Base-TX: Category 5 UTP | |
LED Indicators | |
WAN | Normally on: connected; flashing: data transmission |
LAN | Normally on: connected; flashing: data transmission |
Others | Power(power supply), EOC (EOC chip initialization indicator), |
General Characteristics | |
Dimension (L×W×H) | 180(mm)*110(mm)*31(mm) |
Use environment | Working temperature: -20℃~55℃; |
External power supply | Power adapter output: DC 12V/1A |
Over the years, we have rapidly grown to become a bright star in Ethernet Over Coax Cable Modem Eoc Slave with WiFi industry with scientific management methods, excellent manufacturing processes, and innovative manufacturing concepts. Our company effectively improve the quality of employees, enhance the core competitiveness of enterprises, and establish the overall image. Time has proved that our products have good application value and market efficiency.
You Might Also Like
Send Inquiry










